Rescroll

AI lower thirds generator

Your name and title, landing on your words.

Say “add my name and title as I start talking, in my brand colours” and attach your logo. Rescroll's agent finds the moment in your words, places the lower third clear of your face and captions, takes the colours from your logo and times it in and out. On your own video, from one sentence.

Add your lower third

The short answer

Can AI add a lower third to my video that's timed and in my brand?

Yes. In Rescroll's AI video editor you say “add my name and title when I start talking, in my brand colours” and attach your logo. The agent finds the moment in your transcript, where every word has a timestamp, and designs a lower third for your clip: colours from your logo, your font if you attach it, placed clear of your face and captions, in on the word and out in a pause. It's on Pro and up, in Chrome or Edge on a computer.

Interviews and podcasts work the same way: say “a lower third for Daniel when he first speaks” or “when I say ‘I'm Jess’”, and give each name and title. The agent reads the words, not the voices, so tell it who's who; it doesn't detect speakers or recognise faces.

Need one lower third, quickly, with no video? Rescroll's free lower third maker builds one from a name and a title in your browser and downloads it as an MP4 on green, to key over your footage in any editor.

How it's placed and timed

In on your first word, out in a pause.

The words say when, the picture says where, your logo or font says how it looks. Nothing is keyframed.

editing-hours.mp4 · 1 motion graphic

Lower third · 0.0–4.7s
Videoeditingusedtotakemehours.NowIjustsay,removesilencesandbadtakes,makecolorspop,
0:00pause after “bad takes” · 4.54–4.84s0:05.4

Asked in the chat

jess-moreno-logo.svg

Add my name and title as I start talking: Jess Moreno, video editor & creator. Use my brand colours.

Your name and title come in as you start talking, in your logo's violet and mint, and leave in the pause after “bad takes”. No font was attached, so it's set in Inter Tight.

The words
Her first word is at 0:00.0, so the card lands on “Video”. The pause after “bad takes” runs 4.54 to 4.84 s, so it leaves inside it.
The picture
Her face is centre frame and a mic arm crosses the top left, so the card sits low on the desk side, above the band captions use.
The brand
Violet #8B5CF6 and mint #5EEAD4 from the logo file. No font file came with it, so the agent used Inter Tight and said so.

Examples rendered on the same clip. The agent designs each card for the video and brand it’s given; these aren’t templates to pick from.

Two ways to make one

A form, or your video.

Rescroll has a free lower third maker too. They do different jobs.

Free lower third makerAI lower thirds (this page)
What you give itA name, a title and settings in a formA sentence, plus your logo, font file or brand PDF if you like
DesignOne of five set styles, in your coloursDesigned from scratch for your clip and brand
TimingYou line it up with the introduction in your editorLands on the words you say, leaves in a pause
PlacementFixed positions, clear of app buttons on vertical videoPlaced from the frame, clear of your face and captions
What you getA 1080p MP4 on green or black to key over your footageYour finished video with the lower third on it
PriceFree, no sign-up, in your browserPro, Ultimate and Scale plans

Which plan

AI lower thirds are on Pro. The editor has a free plan.

Pro, Ultimate and Scale

  • Lower thirds and every other motion graphic, designed for your clip from a sentence
  • Colours and type from your logo, font file or brand PDF, held for the whole video
  • Up to 40 graphics on a clip of up to 10 minutes
  • MP4 export at 1080p or your original size

Pro is $20 a month billed yearly, or $29 monthly. Ultimate is $55 / $79, Scale $139 / $199. Graphics use your plan's monthly credits.

The editor’s free plan

  • Cuts, silences and bad takes, captions, zooms and color
  • Plain text on the picture: a name typed in one of the editor's fonts, placed and timed by you or the agent
  • Designed, animated lower thirds aren't included

What it doesn’t do

  • Tell speakers apart by voice or recognise faces: it reads the words, so give it the names, or say when each person first speaks.
  • Export a lower third on its own, as a transparent file or a MOGRT for Premiere: you get the finished MP4.
  • Run during a live stream: it works on recorded video.

The tools people compare

Who times it to your words?

Premiere templates, Envato Elements and Motion Array, Canva, CapCut, Tella and Descript, each from its own pages, checked November 2026.

How it's madeTimed to your introductionYour fonts and coloursNeeds another editorPrice
Premiere Pro (.mogrt templates)A Motion Graphics template you fill in and place by handNo, you place itEdited per template in the Properties panelPremiere; templates are made in Premiere or After Effects$22.99/mo on the annual plan
Envato Elements, Motion ArrayDownloadable templates you fill in and place by handNoSet by hand in the editor you open them inYes: After Effects, Premiere, Resolve, Final Cut or MotionEnvato Elements from $16.50/mo billed yearly
CanvaTemplates you fill in and place by handNoBrand Kit and font upload on ProNoFree plan; Pro about $12/mo billed yearly
CapCutText templates you fill in and place by handNoBrand Kit on TeamsNoFree plan; Pro from $19.99/mo
TellaIts agent adds a lower third from a promptYes, from the transcriptColours from your prompt; font uploadNoPro $13/mo yearly or $16 monthly; 7-day trial
DescriptIts Underlord AI adds name cards, such as one per podcast speakerYes, at each speaker's first appearanceBrand Studio on Business and upNoFree plan; paid from $16/mo billed yearly
Rescroll free lower third makerA form: a name, a title and five stylesNo, you line it up yourselfYour colours, four typefacesYes: key the MP4 over your footageFree, in your browser
RescrollDesigned for your clip from a sentenceYes: on the words, from a word-by-word transcriptAttach your logo, font file or brand PDFNoPro $20/mo yearly or $29 monthly

Already editing in Premiere or Final Cut? A .mogrt or an Envato template is reusable and yours to tweak. Recording screen demos? Tella's agent adds cards too. Editing a podcast transcript-first? Descript's Underlord adds one per speaker. Rescroll is for a card designed for your clip and brand, landed on your words, with the rest of the edit in the same chat.

Sources, checked November 2026

What to type

Say who, say when. Attach your brand.

Each of these is one message in the chat on your clip.

“Add my name and title as I start talking, in my brand colours. (Logo attached.)”

In on your first words

The agent finds where you start speaking, takes the colours from your logo, and lands the card on your first word. It leaves in the next natural pause.

“When I say “I'm Jess”, bring in my name and title, then take it off before the next sentence.”

On the moment you introduce yourself

Name the words and it finds them in your transcript: the card lands on “I'm” and leaves where you say it should.

“A lower third for each guest the first time they speak: Daniel Okafor, author; Priya Shah, host.”

One for each speaker

Give the names and titles. It reads the words, not the voices, so say when each person first speaks if their name isn't said.

“Use our font and colours for every graphic in this video. (Font file and brand PDF attached.)”

Your brand, held for the whole video

Set it once and every lower third and title after it matches: your font file is used as is, your colours from the PDF.

“I just need one name card to put in Premiere.”

One card, no video

That's the free lower third maker: a name, a title, five styles, a 1080p MP4 on green to key over your footage.

Free lower third maker

“Move it to the right, hold it a second longer and make the title smaller.”

Notes, not keyframes

Change any lower third with a sentence. Sliding a whole graphic earlier or later on the timeline costs no credits.

How it works

How to add a lower third with AI.

From a raw interview or talking-head clip to a name card in your brand, on your words.

  1. 01

    Drop in your video

    An interview, a podcast, a talking-head clip: MP4 or MOV up to 10 minutes, any shape, in Chrome or Edge on a computer. The editor transcribes it word by word.

  2. 02

    Ask, and attach your brand

    “Add my name and title when I start talking.” Type the name and title, and attach your logo, font file or brand PDF so it matches.

  3. 03

    Check it, give notes, export

    Watch it land in the preview, say “hold it longer” or “move it right” until it's right, then export the MP4 at 1080p or your original size.

Three ways to get a lower third

A template, a form, or a sentence.

What each gives you, including where the other two are the better pick.

Templates (MOGRT, Envato, Canva)Rescroll's free lower third makerRescroll
Designed for your clip from a sentenceNoNoYes
Lands on the words you say itNoNoYes
Placed clear of your face from the frameNoNoYes
Colours and font from your logo or font fileBy handColours by handYes
An overlay file for any editorYesYesNo
One card in a minute, no video neededYesYesNo
Free to useSomeYesNo

Templates are right when you already edit in Premiere or Final Cut and want a look you can reuse. The free maker is right for one name card on green, fast. Tella and Descript's agents also add lower thirds from a prompt. Rescroll is for a card designed for your clip and brand, timed to your words, alongside the rest of the edit.

Questions

AI lower thirds, answered.

What is a lower third?

A lower third is a graphic in the lower part of the frame that says who or what is on screen, usually a name with a title under it. It sits in roughly the bottom third of the picture, clear of the speaker's face, and appears when someone is introduced or first speaks. Interviews, podcasts, news, tutorials and documentaries all use them.

Is the AI lower thirds generator free?

No. Lower thirds designed by the AI are motion graphics, which are on the paid plans: Pro at $20 a month billed yearly or $29 monthly, Ultimate and Scale. The video editor has a free plan for cuts, captions, color, zooms and plain text on the picture. For one lower third with no video, Rescroll's free lower third maker makes it in your browser, with no sign-up.

What's the difference between this and Rescroll's free lower third maker?

The free maker makes one lower third from a form: a name, a title, one of five styles, downloaded as a 1080p MP4 on green to key over your footage and line up yourself. The AI version designs the lower third for your own video from a sentence, takes the colours from your logo, places it clear of your face and lands it on the words, and exports your finished video.

Can it find the moment I introduce myself?

Yes, from your words. The editor transcribes your clip with a timestamp on every word, so “when I say ‘I'm Jess’” or “as I start talking” is found exactly and the lower third lands on that word. It leaves in the next pause unless you say when.

Can it add a lower third for each speaker in a podcast or interview?

Yes, if you give it the names and titles. It reads words, not voices: it doesn't detect who is speaking or recognise faces. If each guest's name is said, it can find it; otherwise tell it when each person first speaks, like “Priya at 0:42”.

Can it match my brand colours and font?

Yes. Attach your logo and it takes the colours from it, or give hex codes. Attach your font file (.woff, .woff2, .ttf or .otf) and that font is used; a Google font is fetched by name; any other named font is swapped for the closest one and the agent tells you which. Set it once and it holds for every graphic in the video.

Where does it put the lower third?

Low in the frame, placed from a frame of your video at that moment so it stays clear of your face, hands and anything in the way, like a mic arm, and above the bottom band captions and player controls use. Ask for a side or a corner and it goes there.

How long does the lower third stay on screen?

About four seconds by default, ending in a natural pause or on a cut so it doesn't vanish mid-word. Say “hold it six seconds” or “until I finish the sentence” and it's re-timed.

Does the AI lower third work on my own video?

Yes, and only on your own video: the lower third is designed for your clip and exported with it. Clips can be up to 10 minutes long, in any shape from vertical to widescreen.

Can I export just the lower third as a transparent file or a MOGRT?

No. Rescroll exports your finished video with the lower third on it, as an MP4. There's no transparent, ProRes, MOGRT or overlay download. If you need a file to use in another editor, the free lower third maker gives you an MP4 on green to key out.

What resolution is the export with the lower third?

An MP4 of your whole video at 1080p or your original size. The graphics are drawn at about 4K, so the lettering stays sharp.

Which plan includes AI lower thirds?

Pro, Ultimate and Scale. Pro is $20 a month billed yearly or $29 monthly; Ultimate is $55 / $79 and Scale $139 / $199. Graphics use your plan's monthly credits, by what each one actually takes to design.

How does it compare with Premiere MOGRTs, Canva, CapCut and Tella in 2026?

Premiere .mogrt files, Envato and Motion Array templates, Canva and CapCut give you lower third templates to fill in and place by hand. Tella's agent and Descript's Underlord can add lower thirds from a prompt too. Rescroll designs the card for your clip from your logo or font, lands it on your words, keeps it off your face, and does the rest of the edit in the same chat.

Do I need Premiere or After Effects?

No. You describe the lower third and nothing is keyframed or imported. Templates from Envato or Motion Array need After Effects, Premiere, Resolve, Final Cut or Motion to open them.

Does it work on vertical videos for Reels and TikTok?

Yes. Any shape from 3:1 to 1:3 works. On a vertical video the lower third is placed higher, clear of the area the apps cover with captions and buttons.

Stop scrolling.
Start posting.

Decode every Reel. Generate every visual. Post in any style you feed it. Everything you saved is one click away.

Start Your Library